大气层内模型预测静态规划拦截中制导

在临近空间机动目标拦截中,拦截器的初始动力段对中制导段乃至末端拦截性能具有重要影响。在模型预测静态规划（MPSP）理论基础上提出了一种初、中制导联合规划制导方法,旨在解决多阶段、快速、最优拦截轨迹规划和制导问题。首先,提出了一种改进的模型预测静态规划方法,该方法不仅可以满足终端约束,还可以生成最优初始状态,并在性能指标中考虑状态变量相关函数。其次,基于等效阻力模型建立了包含动力段与非动力段的两段规划模型,通过采用分段离散以及构建关机点变分关系的方法,避免了内点约束的引入,使MPSP算法可直接求解该两段规划问题。最后,结合提出的MPSP算法以及两段规划模型,实现了终端速度最优的拦截轨迹规划,结合目标预测方法,实现了对机动目标的预测拦截。仿真结果表明,本文方法可提高制导精度和终端速度,且能更好满足对机动目标的拦截需求。     

Parameter studies and evaluation principles of delamination damage in laminated composites

Delamination represents one of the most severe failure modes in composite laminates, especially when they are subjected to uniaxial compression loads. The evaluation of the delamination damage has always been an essential issue of composite laminates for durability and damage tolerance in engineering practice. Focusing on the most typical and representative elliptical delamination issue, an analytical model simultaneously considering the conservative buckling process and non-conservative delamination propagation process is implemented. Various computational cases considering different delamination depths, directions, aspect ratios, and areas are established, and the predicted results based on the analytical model are carefully compared. Effects of these geometrical delamination parameters on the buckling, delamination propagation, and failure behaviors of composite laminates are thoroughly analyzed, and innovative evaluation principles of the delamination damage have been concluded. It is found that the delamination area is the key factor that truly affecting the failure behaviors of delaminated composites, and the local / global buckling and failure loads show clear linearity with the delamination area, whilst the delamination depth and direction only have slight effects.     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

A novel virtual material layer model for predicting natural frequencies of composite bolted joints

A novel virtual material layer model based on the fractal theory was proposed to predict the natural frequencies of carbon fiber reinforced plastic composite bolted joints. Rough contact surfaces of composite bolted joints are modeled with this new proposed approach. Numerical and experimental modal analyses were conducted to validate the effectiveness of the proposed model. A good consistence is noted between the numerical and experimental results. To demonstrate the necessity of accurately modeling the rough contact surfaces in the prediction of natural frequencies, virtual material layer model was compared with the widely used traditional model based on the Master-Slave contact algorithm and experiments, respectively. Results show that the proposed model has a better agreement with experiments than the widely used traditional model (the prediction accuracy is raised by 8.77% when the pre-tightening torque is 0.5 N∙m). Real contact area ratio A* of three different virtual material layers were calculated. Value of A* were discussed with dimensionless load P*, fractal dimension D and fractal roughness G. This work provides a new efficient way for accurately modeling the rough contact surfaces and predicting the natural frequencies of composite bolted joints, which can be used to help engineers in the dynamic design of composite materials.     

三维四向编织复合材料改进模型弹性性能计算

针对三维四向编织复合材料,在改进的矩形截面单胞模型的基础上,考虑了相邻纤维束之间的界面粘结效应,推导了单胞的几何特性与编织工艺参数之间的数学关系,并且采用ANSYS软件建立了实体有限元模型,得到了等效弹性性能参数;之后,分析了各工艺参数对弹性模量的影响规律.通过有限元计算的材料弹性性能常数与试验数据符合较好,较为真实地模拟了该材料的细观结构,对三维编织复合材料的设计和工艺具有一定的参考价值.      

多退化变量下基于Copula函数的陀螺仪剩余寿命预测方法

针对惯性导航系统中陀螺仪多退化变量条件下的剩余寿命（RUL）预测问题,提出了一种基于Copula函数的多退化变量剩余寿命预测方法。首先,针对退化变量间不同的退化轨迹,采用不同的方法进行退化建模,并对于陀螺漂移系数样本标准差数据波动性随时间递增的特性,提出了一种方差时变的正态随机过程退化建模方法,得到了陀螺仪剩余寿命的边缘分布函数。然后,通过Copula函数来描述退化变量之间的相关性,将得到的剩余寿命的边缘分布进行融合,得到了陀螺仪剩余寿命的联合分布函数。最后,通过陀螺仪实例分析验证了方法的适用性和可行性。     

机翼对自转旋翼机纵向稳定性的影响

为了研究机翼对自转旋翼机纵向稳定性的影响,针对某复合式自转旋翼机,建立了基于状态空间法描述的非线性全量方程数学模型。该模型包含自转旋翼、机身、螺旋桨、机翼和尾翼的气动模型、动态入流模型和稳定性分析模型。运用该模型对比研究了样例自转旋翼机和样例复合式自转旋翼机的纵向稳定性。研究结果表明：机翼的增加对于浮沉模态和短周期模态稳定性是有利的;对于旋翼转速模态稳定性是不利的,在设计复合式自转旋翼机时可以考虑增加旋翼桨尖配重来提高此模态的稳定性。机翼的纵向位置对自转旋翼机的纵向稳定性有显著影响。在机翼纵向位置能满足配平约束条件下,机翼纵向位置越靠后,迎角稳定性越好,但旋翼转速稳定性越差。在设计复合式自转旋翼机时,机翼纵向位置的选择要综合考虑这两个因素进行折中。     

面向集中力扩散的回转曲面加筋拓扑优化方法

为了提高航天器回转曲面加筋型连接结构的集中力扩散效率,需要开展回转曲面加筋集中力扩散结构设计。传统放射肋设计方法普遍依赖设计经验、难以满足集中力高效扩散需求。因此,提出一种面向集中力扩散的回转曲面加筋拓扑优化方法。第1步,建立了一种基于各向异性过滤技术的集中力扩散拓扑优化方法,保证拓扑优化结果满足回转曲面加筋制造工艺要求;第2步,提出了一种基于网格变形技术的拓扑优化结果智能重构方法,可高效准确地对回转曲面加筋拓扑优化结果进行模型自动重构。基于所提出方法,以卫星平台对接环这种典型的回转曲面加筋壳为对象开展算例研究,并将优化结果与传统放射肋设计结果进行对比。结果表明,所提出的优化方法可得到加筋构型清晰、满足回转曲面加筋制造工艺要求的优化结果,且具有集中力扩散效率高、网格质量依赖性低、拓扑特征重构高效等优点。     

基于模块服役状态的盒式连接可重构型架稳定性评估方法

盒式连接可重构型架的稳定性对飞机部件的装配质量有着重要影响。为了解决当前稳定性评估方法在实施成本及有效性上的不足,从型架模块化特征出发提出基于模块服役状态的盒式连接可重构型架稳定性评估方法。首先,分析了盒式连接可重构型架服役过程,指出该过程是由作业期与空置期交替组合而成,并给出了服役稳定性及服役稳定度定义;然后,构建了基于型架关键测量特性的服役状态评价模型,实现了盒式连接可重构型架服役状态退化过程的描述及利用实测数据的空置期服役状态评估;同时,针对作业期内难以甚至无法获取测量数据的问题,提出基于多源稳定性影响因素分析并利用稳定性熵来表征服役状态退化程度的策略;最终融合空置期与作业期的评估结果构建了型架稳定性综合评价模型,相比传统的定检方法能够更简捷、有效地完成某一时间段内型架服役稳定性评估。最后,以某型垂尾盒式连接可重构装配型架后梁定位器模块为实验对象,验证了所提出方法的有效性。     

A tip clearance prediction model for multistage rotors and stators in aero-engines

Tip clearances of multistage rotors and stators greatly affect aero-engines’ aerodynamic efficiency, stability and safety. The inevitable machining and assembly errors, as well as the complicated error propagation mechanism, cause overproof or non-uniform tip clearances. However, it is generally accepted that tip clearances are difficult to predict, even under assembly state. In this paper, a tip clearance prediction model is proposed based on measured error data. Some 3D error propagation sub-models, regarding rotors, supports and casings, are built and combined. The complex error coupling relationship is uncovered using mathematical methods. Rotor and stator tip clearances are predicted and analyzed in different phase angles. The maximum, minimum and average tip clearances can be calculated. The proposed model is implemented by a computer program, and a case study illustrates its performance and verifies its feasibility. The results can be referred by engineers in assembly quality judgement and decision-making.